Ø 8 mm St/Cu
enter a price
- Length
- 85.5 m
- Mass
- 35 kg
- Net price
- —

Draw the building outline and place the connection leads and vertical rods. Count the St/Cu wire, joints and cost.
Choose an outline or draw one on the grid. You can change the dimensions with the mouse or in the fields.
Drag a corner. Click a wall to change its length.
X marks horizontal walls in the drawing, Y vertical ones, S slanted ones. Type a length and press Enter: the wall end and the next corner move along it.
The same length from your project: 85.5 m (ring earth, leads and reserve). Wire is priced per metre, tape per kilogram, as on the market.
enter a price
enter a price
Enter both net prices.
Mass: wire 35 kg, tape 85 kg.
1 kg of Ø 8 mm St/Cu wire = 2.43 m, 1 kg of 25 × 4 mm tape = 1.27 m, 1 kg of 30 × 4 mm tape = 1 m
Conversion: Ø 8 mm St/Cu copper-bonded wire and galvanized 25 × 4 mm tape per the CBM slide (10.2026), galvanized 30 × 4 mm tape per the CBM article (06.2026). Mass is counted in whole kilograms. You enter the prices yourself; current prices are available from CBM. According to the CBM article (06.2026), an earth electrode made of Ø 8 mm St/Cu copper-bonded wire can last up to 20 years longer in the soil than galvanized tape.
| Item | Quantity | Net price [EUR] |
|---|---|---|
| Copper-bonded wire Ø 8 mm St/Cu: ring earth and leads from the ring to the clampC1110249(60M)METR · Drut St/Cu;0,070mm Cu;fi 8mm;60m · length to order · mass in whole kg | 85.5 m · 35 kg | |
| Copper-bonded wire Ø 8 mm St/Cu: loop in the slab joined to the reinforcementC1110249(60M)METR · 1.0 m from the building edge: loop 48.0 m + reserve | 52.8 m · 21 kg | |
| Copper-bonded wire Ø 8 mm St/Cu: loop–ring conductorsC1110249(60M)METR · 4 × sloped from the slab loop to the ring: 11.5 m + reserve | 12.7 m · 5 kg | |
| Oblique clamp wire Ø 8 / wire Ø 8, stainless steelC1030476N Uchwyt skośny,drut fi8/fi8,stal nierdz.;M8zamkowa · at the ring: 1 × ring closure, 4 × lead from the ring to the clamp, 4 × loop–ring conductor · at the loop: 4 × loop–ring conductor, 1 × loop closure · proposal to be confirmed by CBM | 14 pcs | |
| Forged earth rod 14.2 mm / 1 mC0000171C100 · 4 × 3.0 m: 3 × 1 m sections per rod | 12 pcs | |
| Oblique clamp rod 14.2 / wire Ø 8, stainless steelC1030477N Uchwyt skośny,uz.14,2/drut fi8,stal nierdz;M8zamko · 1 per rod (rod–ring) · proposal to be confirmed by CBM | 4 pcs | |
| Oblique clamp wire / reinforcing bar, black steelC1030475S Uchwyt skośny drut/bed.,pręt zbr.;stal;M8 zamkowa · 24 loop–reinforcement (every 2 m of the loop, PN-EN 62305-3:2025) | 24 pcs | |
| CBM insulating tape for underground joints, 30 mm × 10 mC1030355 · 1 roll per 4 clamps in the soil: 9 × C1030476N at the ring + 4 × C1030477N rod–ring · Insulating tape for an earthing clamp in the soil. The tape prevents stress corrosion, which occurs when two factors act together: a corrosive environment (the soil) and a constant tensile force on the clamp plates from the tightened bolts. Removing the corrosive environment prevents stress corrosion. | 4 pcs | |
| Driving head for forged rod 14.2 and 16 mm, SDS-Max (optional)C1090375 Bijak do uziomu kut.;14,2mm i 16mm;SDS-Max · for an SDS-Max hammer | 1 pcs | |
| Driving pin for forged rod 14.2 mm (optional)C1080375 Trzpień do uziomu kutego;14,2mm | 1 pcs | |
| Stabiliser for forged rod 14.2 mm (optional)C1070375 Stabilizator do uziomu kutego;14,2mm | 1 pcs | |
| Total St/Cu wire Ø 8C1110249(60M)METR · sum of the 3 wire rows above (no separate price) | 151.0 m · 61 kg |
Quantity plan: the ring earth is an offset of the outline sides with square corners. The joint count assumes a closed wire loop and one connection per connection lead. Resistance is an estimate for uniform soil: with vertical rods the result is the rods alone (BS 7430), without rods the ring alone R = 0.6·ρ/√A (CBM article, consistent with DEHN). Cutting plan, additional joints, material selection and soil conditions must be checked in the design, and the resistance must be confirmed by measurement. The tool does not confirm compliance with standards.
ROT = 0,6 · ρ / √A (M. Łoboda, R. Marciniak, CBM article 06.2026, Table 1; consistent with DEHN, tab. 5.5.1) · Rr = ρ / (2πL) · [ln(8L/d) − 1] (BS 7430:2011, cl. 9.5.3, d = 14.2 mm) · result = Rr / n, the rods alone: with a combined electrode the ring and horizontal electrodes are not included (agreed with CBM); the ring is calculated only without rods.
Slab reinforcement is not included in the resistance. Preliminary calculation for uniform soil; the result must be checked in the design and by measurement after installation. Schematic drawing, dimensions come from the parameters.
| Material | Length | Mass | Net price [EUR] | Net cost [EUR] |
|---|---|---|---|---|
| copper-bonded wire Ø 8 mm St/Cu | 85.5 m | 35 kg | ||
| galvanized tape 30 × 4 mm | 85.5 m | 85 kg |
1 kg of Ø 8 mm St/Cu wire = 2.43 m, 1 kg of 25 × 4 mm tape = 1.27 m, 1 kg of 30 × 4 mm tape = 1 m. Mass in whole kilograms. Wire is priced per metre, tape per kilogram; the designer enters net market prices.
Quantities are a geometric suggestion; cutting plan, joints and fittings are agreed in the design. The designer enters net prices; current prices are available from CBM.
| Item | Catalogue no. | Quantity | Net price [EUR] | Net value [EUR] |
|---|---|---|---|---|
| Copper-bonded wire Ø 8 mm St/Cu: ring earth and leads from the ring to the clampC1110249(60M)METR · Drut St/Cu;0,070mm Cu;fi 8mm;60m · length to order · mass in whole kg | C1110249(60M)METR | 85.5 m · 35 kg | ||
| Copper-bonded wire Ø 8 mm St/Cu: loop in the slab joined to the reinforcementC1110249(60M)METR · 1.0 m from the building edge: loop 48.0 m + reserve | C1110249(60M)METR | 52.8 m · 21 kg | ||
| Copper-bonded wire Ø 8 mm St/Cu: loop–ring conductorsC1110249(60M)METR · 4 × sloped from the slab loop to the ring: 11.5 m + reserve | C1110249(60M)METR | 12.7 m · 5 kg | ||
| Oblique clamp wire Ø 8 / wire Ø 8, stainless steelC1030476N Uchwyt skośny,drut fi8/fi8,stal nierdz.;M8zamkowa · at the ring: 1 × ring closure, 4 × lead from the ring to the clamp, 4 × loop–ring conductor · at the loop: 4 × loop–ring conductor, 1 × loop closure · proposal to be confirmed by CBM | C1030476N | 14 pcs | ||
| Forged earth rod 14.2 mm / 1 mC0000171C100 · 4 × 3.0 m: 3 × 1 m sections per rod | C0000171C100 | 12 pcs | ||
| Oblique clamp rod 14.2 / wire Ø 8, stainless steelC1030477N Uchwyt skośny,uz.14,2/drut fi8,stal nierdz;M8zamko · 1 per rod (rod–ring) · proposal to be confirmed by CBM | C1030477N | 4 pcs | ||
| Oblique clamp wire / reinforcing bar, black steelC1030475S Uchwyt skośny drut/bed.,pręt zbr.;stal;M8 zamkowa · 24 loop–reinforcement (every 2 m of the loop, PN-EN 62305-3:2025) | C1030475S | 24 pcs | ||
| CBM insulating tape for underground joints, 30 mm × 10 mC1030355 · 1 roll per 4 clamps in the soil: 9 × C1030476N at the ring + 4 × C1030477N rod–ring · Insulating tape for an earthing clamp in the soil. The tape prevents stress corrosion, which occurs when two factors act together: a corrosive environment (the soil) and a constant tensile force on the clamp plates from the tightened bolts. Removing the corrosive environment prevents stress corrosion. | C1030355 | 4 pcs | ||
| Driving head for forged rod 14.2 and 16 mm, SDS-Max (optional)C1090375 Bijak do uziomu kut.;14,2mm i 16mm;SDS-Max · for an SDS-Max hammer | C1090375 | 1 pcs | ||
| Driving pin for forged rod 14.2 mm (optional)C1080375 Trzpień do uziomu kutego;14,2mm | C1080375 | 1 pcs | ||
| Stabiliser for forged rod 14.2 mm (optional)C1070375 Stabilizator do uziomu kutego;14,2mm | C1070375 | 1 pcs | ||
| Total St/Cu wire Ø 8sum of the 3 wire rows above (no separate price) | C1110249(60M)METR | 151.0 m · 61 kg | ||
| No complete price | ||||